DBS1000 from BEC
Now in Stock

DBS2000's power in a small box.  The DBS1000 uses the same powerful LSI processor for the fastest possible operation.

 

Small in size.  Only 9" (22.5cm) wide, 2" (5cm) tall, and 8" (20cm) deep
SMALL YET FULL FEATURED
 
DVB Satellite Receiver  

DBS-1000
  Function

Digital FTA
  Brand / Market

BEC /NORTH AMERICAN
  Appearance Color / Type

Silver, Black / U1
LNB      
  Frequency Range 950-2150 MHz v
  Frequency Level -25 to -65 dBm v
  DiSEqC Version: 1.0 or 1.1 or 1.2 1.0 & 1.2
  22KHz Tone Frequency: 22 KHz, Amplitude:0.6 Vp-p v
  0/12 V control   v
  Supply Horizontal: 18V, Vertical: 14V (400mA Max.) v
Tuner      
  Impedance 75 Ohm v
  Input & Loop Output Connector F Connector x 2 (1 Input, 1 Loop through Output) v
  IF Bandwidth MHz (Narrow/Wide), -3dB ZERO IF
Demodulator      
  Demodulation Waveform QPSK v
  Symbol Rate Msps 2-45
  FEC Decoder 1/2, 2/3, 3/4, 5/6, 6/7, 7/8, AUTO v
Video      
  Decoding MPEG-II and MPEG-I Compatible v
  Profile & Level Main Profile, Main Level v
  Format 720x576(PAL)/720x480(NTSC) v
  Aspect Rate 4:3 / 16:9 v
  Aspect Rate Letter box/Piller box/…….. v
  Output Impedance 75 Ohm v
  Composite Output Level 1 ±0.2Vp-p (75 Ohm Load) v
Audio      
  Decoding MPEG-II, Layer I/II, Musicam v
  Sound Mode Stereo, Audio L, Audio R, Mono v
  Sampling Rate 32KHz, 44.1KHz, 48KHz v
RF Modulator      
  Output Channel NTSC (CH 3/4) v
  System NTSC-3.58 v
Connector      
  RCA 1 Video, 2 Audio 1
  S-VHS Video 1
  Serial Data Interface 9-pin D-sub Connector (RS-232) 1
Microprocessor & Memory      
  Main Chip LSI SC2000/SC2005  
  Flash Mbyte 1M x 1(up to 8)
  SDRAM Mbyte 2M x 1 , 8M x 1
User Input      
  IR Remote control 32 Keys v
  Keypad Power/Menu/Select/Exit/Left/Right/Up/Down v
General      
  Control Output Speaker Jack (0/12V) v
  Input Voltage Range AC 90~260V, 47~63Hz v
  Power Consumption Operating Mode (Watt, Max) 40
  Dimensions (Width x Dimension x Height) mm 230x200x63
  Weight KG 1.8
Software      
  Number of Satellite Number of Satellites (Programmable) 64
  Number of Channel Number of Channel (Programmable) 5000
  Insert PID channel   v
  Multi Language Audio   8
  NIT, EPG, Teletext(DVB EST300 472)   v
  NTSC/PAL Conversion   v
  Software Download via Satellite   Option
  IRD/PC to IRD data copy   v
  Sleep/VCR Timer, Phone Book, Calendar   v
  Favorite, Sorting, Move,  Delete SAT/TP/Channel   v
  Graphic Display Color/Layer 16/5(256 option)
  ICON Style OSD   v
  Multi Language OSD English,French,German,Spanish,Portuguese, Italian,Arabic,Persian,Turkish 9
Accessory      
  Remote *1 / Battery *2 / Operation Manual *1   v
Packing      
  10 set/carton ; 4.1 cu'ft/carton ; 18 kg/carton   v
  2,200 set/20'ft-container ; 4,400 set/40'ft-container ; 4,500 set/40'ft-HQ-container   v

This receiver programs like the DB 2000.  Go to DB 2000 HELP  page  This is for general programming

Doc Scott

Programming for Doc Scott, the University Network on Telstar 6

   This is for those that have a fixed dish that will be dedicated to T6 and Doc Scott.

    When you receive your satellite receiver it will be set up for receiving programming on Telstar 5, or no programming at all,  you must change that for Telstar 6., the satellite that Doc Scott is on.  To program the receiver we will use the 8 light blue buttons in the middle of the remote control. Press the menu button which is top left blue button. Note at the bottom of the page there is a diagram showing which buttons do what.  Now scroll to the right and highlight the setup tab. See below left and right. Now scroll down to "LNB Port" and press enter, lower right of left down-left arrow button, This will open the "lnb port setup" screen.  Scroll down to line 4 "Satellite(s)" and press enter. This will open a window within the window,  scroll down and highlight "Telstar 6". Press enter placing check before Telstar 6 and press exit.   Now you will see the 4th screen below.

Highlight Dish Type enter,  and select Fixed. Highlight LNb type and select Ku band. your screen should look like the 4th one above.  You may need to reenter Telstar 6.

Now press "Exit" once, highlight "CH Search" and press enter. This will open up the "Channel Search" screen, see below.  Highlight "satellite" press "enter", scroll down to "Telstar 6" and press "Enter".  Scroll down to line 3, "TP Index" and press "enter" Most but not all receivers are preprogrammed TP 3 wit the information for doc scott.  If not scroll down  until you see a selection that has the numbers 11862.  Press enter and make selections until you see a TP that has the following information  Frequency 11862, "Symbol Rate 3516,  Polorization = Vertical. This is the information for euGene.  After scanning you may wind up with numbers that differ slightly from these.  Don't  worry, they will work  If you can not find these settings, select "new" and punch in your own numbers.  When you are done your screen should look like the one below.  Very important!  highlight say "TP Index and press "enter"  this will activate the meter.  When you have a lock on the "Satellite and Channel" your bars STR and Qual bars will turn "gold".  If they are reddish and read say 68 and 35, your meter is NOT operating.  The screen below is locked onto T6, TP 3.  Move your dish until the bars turn from red to gold and try to maximize the numbers, especially the quality.  68 and 68 are excellent for this machine.  Numbers are only relative and vary from model to model of receiver.   See below. Now scroll down to scan type, enter, select "One Sat", enter, scroll and highlight "scan" and press enter. your receiver will now find the stations.  When the screen say "scan complete" exit out of all menus and save changes.

Frequency,  if l1865 doesnt lock try 11862

You may also see news feeds and Bloomberg financial.

   You can use any active transponder to find a station on any bird.  If you plan to store programming from multiple satellites into the receiver memory go to "LNB Port Setup" in the setup folder, change line 2 to DiSEqC 1.2, highlight satellite, press enter and check off all of the satellites you wish to store in memory.  If you ever wish add a motor to move the dish, you do that through the "DiSEqC 1.2 Setup" folder.

 

Enjoy!

For rolling black and white picture press rf button then left arrow until receiver goes from PAL to NTSC mode.

HOME

Taylor Enterprises  859/356-9666     

HOME